| SGD Embroidery Products | SGDKits | SGD Notions | ArtFabric Studio Products | contact us | |
| Click here to enter store. | |||||
Susa Glenn Designs & ArtFabric Studio
Known Pattern Errors and Omissions
If you find a problem with any of the instructions and the solution is not here,
Susa Glenn Designs bags & totes
The Large Asian Tote: instructions, should read:
page 2 step 2: Prepare the zipper slot: Pin (right sides together) one of the 8”X8” pocket squares to the right side of the lining. Line up the top edge of the pocket square with the top edge of the zipper interfacing Pin at each pocket corner to keep orderly. Turn over. Using the center narrow rectangle that you cut out of the iron-on interfacing as your guide, sew the pocket piece and the lining together around the edge of this narrow rectangle only. Use small stitches and at each corner pivot with your needle down. Carefully cut a slit down the center of this narrow rectangle to 1/4” from each end. Snip diagonally deeply into each corner of the zipper slot but do not cut your stitching thread. Pull the pocket fabric through the slit. Smooth it down and adjust the seam line. Carefully press with an iron so that the pocket fabric does not show from the lining fabric side and the rectangle is sharp and clean.
page 3, step 11, assemble the bag bottom insert: In addition to taping the Bag Structure together to make the bag bottom insert, use a household stapler and staple the overlapping pieces to insure strength and stability.
HTCW brand sew-in craft weight interfacing #9260 is recommended instead of felt for the interfacing.
ArtFabric Studio Products
Catchit Frog: The lily pad pattern was accidentally left out of a small number of patterns. If your Catchit Frog kit is missing the lily pad pattern, please email me and I will send you one at once.
FishLips: #10, page 2 should read: FishLips’ lips: Fold each 1.75”X7” bias strip in half lengthwise (wrong sides together) to measure 7/8”X7”.
Susa Glenn Designs Embroidery Products
April, 2006: A few of the New Embroidery CD's that were sold in April 2006 have an error; some words located under the pictures in the general instructions were cut off when printed. Here is a link to the correction.
5/23/2006: When printing a pdf file using Adobe Acrobat Reader the scaling should be set at "none" in order for patterns and templates to print correctly. Here is a link to information for printing the pattern for the Bee's Knees Bag regarding this issue.
7/29/2006: There are some scaling issues regarding The Bee's Knees Bag project. The printed templates are not sized correctly in relationship to the bag's pattern. If you find that you have one of the CD's with this error, please email me and I will email you the correction.